How Much Does Metal Roofing Cost?

Metal roofing costs between $7 and $18 per square foot installed for standard residential steel and aluminum panels. A full metal roof replacement on an average-size home runs roughly $10,500 to $36,000 depending on the metal type, the panel profile, the roof size, and local labor rates. According to HomeGuide, the national average falls between $7,500 and $40,000 for a complete metal roof installation. Metal costs more upfront than asphalt shingles, but it lasts two to three times longer and delivers real savings on energy bills and insurance premiums year after year. This guide breaks down exactly what drives the cost of a metal roof so homeowners in Manassas, Virginia, and across Northern Virginia can budget accurately and make a confident decision.

How Much Does a 1,000 Sq Ft Metal Roof Cost?

A 1,000 square foot metal roof costs roughly $7,000 to $18,000 installed, depending on the material and the complexity of the roof. At the lower end ($7 per square foot for corrugated steel), the cost is about $7,000. At the mid-range ($12 to $14 per square foot for standing seam steel), the cost is about $12,000 to $14,000. At the higher end ($18 per square foot for premium standing seam), the cost is about $18,000.

A 1,000 square foot roof equals 10 roofing squares. This is a smaller residential roof, typical for a ranch-style home, a townhouse, or a detached garage. According to Angi, the average home in the United States has a roof area between 1,300 and 1,800 square feet. A 1,000 square foot roof is on the smaller end, which means lower total cost but roughly the same cost per square foot as a larger roof.

Keep in mind that the roof area is usually larger than the home’s floor plan because of the slope. A home with 1,000 square feet of living space and a 6:12 pitch roof has about 1,120 square feet of actual roof surface, according to GAF. Steeper pitches add more surface area, which increases material and labor costs.

Homeowners in Manassas and Fairfax with smaller homes or townhomes benefit from getting a precise roof measurement before requesting estimates. A certified metal roofing contractor will provide an accurate measurement as part of the free estimate process.

Is It Cheaper to Do a Metal or Shingle Roof?

A shingle roof is cheaper upfront. A metal roof is cheaper over its full lifetime. Metal roofing costs about two to three times more than asphalt shingles at installation, but it lasts two to three times longer and saves money on energy and insurance every year it is on the house.

According to HomeGuide, a mid-range standing seam metal roof costs about $9 to $16 per square foot installed. A standard asphalt shingle roof costs about $4 to $8 per square foot installed. For a 2,000 square foot roof, that is roughly $18,000 to $32,000 for metal compared to $8,000 to $16,000 for shingles.

The long-term math changes the picture. According to the National Association of Home Builders (NAHB), asphalt shingles last 20 to 30 years. The Metal Roofing Alliance reports that standing seam steel roofs last 40 to 60 years. Over a 60-year period, a homeowner would replace shingles two or three times while the metal roof keeps going. That means the total lifetime cost of shingles can actually exceed the cost of metal.

According to State Farm, a metal roof can save a homeowner about 40% on energy costs. According to the Insurance Institute for Business and Home Safety (IBHS), metal roofs rated for impact resistance can earn homeowners insurance discounts of 5% to 35%. These ongoing savings reduce the real cost of a metal roof year after year.

For homeowners in Manassas and Northern Virginia who plan to stay in their home for 15 years or more, metal is often the better financial decision over the full lifecycle. Choosing the best roofing material depends on your budget today and your plans for the future.

Is a Metal Roof Cheaper Than Wood?

A metal roof is often comparable in upfront cost to a wood shake roof, but metal lasts much longer and requires far less maintenance. In many cases, metal ends up being the cheaper option over the life of the roof.

According to RubyHome, cedar shingles and shakes cost about $8 to $14.30 per square foot installed. Standing seam metal costs about $10 to $16 per square foot installed. The upfront cost ranges overlap, with metal slightly higher on average.

The lifespan difference is where metal wins. According to the NAHB, wood shakes last about 20 to 40 years depending on the wood species, the climate, and maintenance. Cedar shakes in humid climates like Northern Virginia require regular treatment with preservatives and fungicides to prevent rot, moss, and insect damage. According to DECRA, a major metal roofing manufacturer, metal roofs last up to 70 years with minimal maintenance.

Wood also carries a higher fire risk. Untreated wood shakes have a Class C fire rating (the lowest), while metal roofs carry a Class A rating (the highest). In areas where wildfire risk or fire insurance ratings matter, metal is the safer and often cheaper choice when insurance premium differences are factored in.

Homeowners in Fairfax and Manassas who love the look of wood shakes can get metal panels that mimic the appearance of wood without the maintenance, fire risk, or shorter lifespan. Comparing how long different roofing materials last shows why metal consistently delivers the best long-term value.

What Is the Cheapest Type of Roof to Install?

The cheapest type of roof to install is a standard three-tab asphalt shingle roof. According to RubyHome, basic three-tab asphalt shingles cost about $4.25 to $4.95 per square foot installed. Architectural shingles cost about $4.50 to $8.25 per square foot installed. Both are significantly cheaper at installation than metal, wood, slate, or tile.

Among metal options, corrugated steel is the cheapest. According to Western States Metal Roofing, corrugated metal panels cost about $7 to $12 per square foot installed. That is only slightly more than premium asphalt shingles. Corrugated metal is popular for garages, barns, and secondary structures throughout rural Northern Virginia.

Cheapest at installation does not mean cheapest over time. Three-tab shingles last about 20 years. Corrugated metal lasts 40 to 60 years. When you divide the total cost by the years of service, the annual cost of metal is often lower. For homeowners in Manassas weighing the options, thinking about cost per year instead of total upfront cost changes the equation.

What Is the Biggest Problem With Metal Roofs?

The biggest problem with metal roofs is poor installation. The metal material itself is one of the most durable roofing products available. But when it is installed incorrectly, it can leak, make noise, develop rust, and fail years before it should.

According to the Metal Roofing Alliance, up to 90% of metal roof failures are caused by installation errors, not material defects. The most common installation problems include improper fastener placement, missing or incorrectly installed flashing, using abrasive tools that damage the protective Galvalume coating, and failing to allow for thermal expansion.

According to the Metal Construction Association (MCA), improper fastener installation alone accounts for about 60% of metal roof leak complaints. Over-driven screws crack the rubber washer and create leak points. Under-driven screws leave gaps. Screws driven at an angle seal unevenly. Each one of these mistakes is preventable with proper training and care.

In Manassas, Virginia, where summer highs reach the upper 90s and winter lows drop into the teens, thermal expansion is a real concern. Metal panels expand and contract with temperature changes. If panels are fastened too tightly without room for movement, they buckle and warp, a visible defect called oil canning.

Hiring a qualified, certified contractor eliminates the biggest risk factor for metal roof problems. Finding the right roofing contractor is the single most important step in any metal roofing project.

What Is the Life Expectancy of a Metal Roof?

The life expectancy of a metal roof is 40 to 70 years for steel and aluminum, and 80 to 100+ years for copper and zinc. Standing seam steel is the most common residential option and typically lasts 40 to 60 years with minimal maintenance.

According to the EPDM Roofing Association’s 2025 survey data and cross-industry comparisons, metal roofing consistently ranks among the longest-lasting materials available for residential use. The Metal Roofing Alliance reports that properly installed standing seam metal roofs routinely reach 50 years and beyond.

According to the NAHB, here is how metal compares to other common materials: three-tab asphalt shingles last about 20 years, architectural shingles about 30 years, wood shakes 20 to 40 years, and slate 60 to 150 years. Metal falls in the premium durability category alongside slate, but at a much lower cost.

Climate, installation quality, and maintenance all affect how long a metal roof lasts. In Northern Virginia, where roofs face UV exposure, humidity, storms, and freeze-thaw cycles, metal handles the full range of conditions without the cracking, curling, or granule loss that shortens asphalt shingle life. Regular inspections every few years keep small issues from becoming expensive problems.

Can I Put a Metal Roof Over Shingles?

Yes, you can put a metal roof over shingles in most cases. Metal is lightweight enough to be installed over one existing layer of asphalt shingles without exceeding the load capacity of a standard residential roof frame.

According to the International Residential Code (IRC), a maximum of two total roofing layers is generally allowed. If there is one layer of shingles, metal can go over it. If there are already two layers, everything must come off first.

Installing metal over shingles saves the cost and time of tear-off and disposal. According to HomeAdvisor, tear-off adds about $1 to $5 per square foot to the total project cost. On a 2,000 square foot roof, skipping tear-off can save $2,000 to $10,000.

The trade-off is that installing over shingles prevents the contractor from inspecting the deck underneath. According to the National Roofing Contractors Association (NRCA), about 25% of roofing projects reveal unexpected deck damage like rot, water damage, or soft spots. Hidden deck problems will continue to worsen under the new metal roof if they are not addressed.

Most contractors in Manassas and Fairfax recommend removing old shingles before installing metal so the deck can be fully inspected and repaired. This costs more upfront but provides a stronger foundation for a roof that will last 40 to 60 years. The differences between reroofing and full replacement help homeowners decide the best approach.

Is It Better to Remove Shingles Before Installing a Metal Roof?

Yes, it is generally better to remove shingles before installing a metal roof. Removing the old shingles lets the installer inspect the entire roof deck for hidden rot, water damage, and soft spots. It also creates a cleaner, flatter surface for the underlayment and metal panels.

According to the NRCA, about 1 in 4 roofing projects uncovers deck damage that was invisible from the surface. Fixing these problems before the new metal goes on prevents future leaks and structural issues that would be much more expensive to repair after the metal is installed.

Removing shingles also reduces the total weight on the roof structure. While metal is lightweight (about 1 to 1.5 pounds per square foot), adding it on top of old shingles (2 to 3 pounds per square foot) increases the combined load. For older homes in Northern Virginia built before current building codes, this extra weight can be a concern.

The decision comes down to budget versus long-term quality. Installing over shingles saves money now. Removing shingles and inspecting the deck costs more now but provides a better foundation for a roof that should last half a century. Homeowners in Gainesville and Manassas should discuss both options with their contractor and weigh the pros and cons for their specific situation.

When Should You Not Use a Metal Roof?

You should not use a metal roof when the roof slope is too low for the panel type, when the local HOA prohibits metal, when the existing structure cannot support the installation requirements, or when the budget simply does not allow for the higher upfront cost.

Standing seam metal roofs need a minimum slope of 3:12 (three inches of rise for every twelve inches of run). Some exposed fastener panels can be installed as low as 1:12 with proper sealant, but low-slope applications increase the risk of leaks at panel overlaps. For flat or near-flat roofs on commercial buildings, TPO or EPDM membranes are typically a better fit than metal panels.

Some homeowner associations in Fairfax, Ashburn, and other Northern Virginia communities have rules about roofing materials, colors, and profiles. Always check with your HOA before committing to a metal roof. Getting approval in writing before the project starts avoids costly disputes later.

If budget is the primary constraint, a high-quality architectural asphalt shingle with a 30-year warranty can be a smart alternative until finances allow for a metal upgrade down the road. Asphalt shingle options provide reliable performance at a lower upfront investment.

Do Insurance Companies Like Metal Roofs?

Yes, most insurance companies like metal roofs. Metal roofs have Class A fire ratings, strong wind resistance ratings, and long lifespans, all of which reduce the likelihood and cost of insurance claims. Many insurers offer premium discounts for homes with metal roofs.

According to the IBHS, metal roofs rated for impact resistance (Class 4 under UL 2218) can earn homeowners insurance discounts of 5% to 35%, depending on the state and the insurance carrier. According to the National Association of Insurance Commissioners (NAIC), homes with Class A fire-rated roofing can see additional premium reductions of 5% to 20%.

The concern some insurers have is cosmetic hail damage. Hail can dent thin metal panels without causing a functional problem. Some carriers in Virginia exclude cosmetic damage coverage on metal roofs, which can actually lower the premium further because it reduces the carrier’s exposure to non-structural claims.

Homeowners in Manassas and across Northern Virginia should ask their insurance provider specifically about metal roof policies before choosing a panel type and gauge. A 24-gauge standing seam panel offers the best combination of hail resistance and insurance favorability. Learning about the factors that affect insurance premiums helps homeowners see how a roof upgrade can lower their annual costs.

Does Insurance Go Down With a Metal Roof?

Yes, insurance often goes down with a metal roof. The exact discount depends on the insurer, the metal roof’s impact rating, fire rating, and wind resistance rating, and the location of the home.

According to the IBHS, a Class 4 impact-rated metal roof qualifies for the largest insurance discounts, ranging from 5% to 35%. A Class A fire rating and a wind resistance rating of 110 mph or higher further improve the homeowner’s risk profile with the insurer.

Over a 40- to 60-year metal roof lifespan, annual insurance savings of even 10% to 15% add up to thousands of dollars. Combined with the up to 40% energy savings reported by State Farm, a metal roof can recover a significant portion of its higher upfront cost through lower annual operating expenses.

Do Metal Roofs Increase Home Value?

Yes, metal roofs increase home value. According to Opendoor, a new roof typically adds $10,000 to $20,000 to a home’s resale value. Metal roofs command a premium over asphalt shingles because of their longer lifespan, lower maintenance, and modern curb appeal.

According to the National Association of Realtors (NAR), curb appeal contributes about 7% of a home’s perceived value. A clean, modern standing seam metal roof signals to buyers that the home has been well-maintained and will not need a new roof for decades. This is a powerful selling point in competitive real estate markets like Northern Virginia.

Homes in Manassas, Fairfax, and Gainesville with metal roofs stand out in listings. Buyers see long-term value and lower future costs, which often translates to faster sales and stronger offers.

What Devalues a House the Most?

The things that devalue a house the most are deferred maintenance, a damaged or aging roof, poor curb appeal, outdated systems, and structural problems. Among exterior elements, a roof in bad condition is one of the biggest value killers.

According to the NAR, buyers associate a worn-out roof with hidden problems and expensive future repairs. A home with missing shingles, visible damage, or a roof past its expected lifespan can lose thousands of dollars in perceived value. Some buyers will walk away entirely rather than take on a roof replacement immediately after purchase.

On the flip side, a new roof is one of the fastest ways to restore or increase home value. According to Opendoor, a new roof adds $10,000 to $20,000 to resale value and offers an ROI of 85% to 95%, according to data compiled by Straight Line Construction. A metal roof in particular signals decades of worry-free ownership to potential buyers.

Homeowners in Northern Virginia who are thinking about selling in the next few years should consider the condition of their roof as a top priority. Even if selling is not on the horizon, maintaining the roof protects the value of the home every day. Regular inspections catch small problems early. Knowing the top reasons homeowners call a roofer helps you spot warning signs before they become value-destroying problems.

How to Increase Home Value by $50,000?

You can increase home value by $50,000 through a combination of high-ROI improvements, including a new roof, updated siding, modern windows, a kitchen refresh, and improved landscaping. No single project adds $50,000 on its own for most homes, but combining several high-impact upgrades gets close.

According to the NAR’s 2024 Remodeling Impact Report, the exterior projects with the highest ROI include new roofing, new siding, garage door replacement, and updated entry doors. A new metal roof alone can add $10,000 to $20,000 in value, according to Opendoor. New siding adds another $8,000 to $15,000 in perceived value, according to the Remodeling Magazine Cost vs. Value Report.

For homeowners in Manassas and Fairfax, investing in a combination of a new roof and updated exterior elements like gutters and siding creates the biggest jump in curb appeal and resale value. Vertex Roofing offers roofing, gutters, and siding services, making it possible to tackle multiple exterior upgrades with one experienced team.

What Is Better Than a Metal Roof?

Very few roofing materials are better than metal in overall performance. Slate is more durable and longer-lasting than metal, but it costs significantly more and is much heavier. For most residential applications, metal offers the best balance of durability, weight, cost, and longevity.

According to the NAHB, slate roofs last 60 to 150 years, compared to 40 to 60 years for standing seam steel. But slate costs $12 to $22 per square foot installed, according to RubyHome, compared to $10 to $16 for standing seam steel. Slate also weighs 800 to 1,500 pounds per square (100 square feet), while metal weighs only 100 to 150 pounds per square. Many residential roof structures cannot support slate without expensive reinforcement.

Clay and concrete tiles last 50 to 100+ years and offer excellent fire resistance, but they share the same weight limitations as slate and are more common in warm Southern climates than in Northern Virginia.

For homes in Manassas, Fairfax, and across Northern Virginia, standing seam metal offers the best combination of long lifespan, low weight, energy efficiency, and overall value. Why metal roofs perform well in extreme climates explains how metal handles the full range of Northern Virginia weather conditions.

What Time of Year Is the Cheapest to Replace a Roof?

The cheapest time of year to replace a roof is late fall and winter, from November through February. Roofing demand drops during cooler months, and many contractors offer more competitive pricing and faster scheduling to keep their crews working.

According to a 2024 homeowner roofing survey published by Roofing Contractor Magazine, the busiest months for roof replacements are May through September. During peak season, wait times are longer and pricing is less flexible.

Metal roofing is well-suited for cooler-weather installation because the panels are mechanically fastened and do not rely on heat-activated adhesive strips like asphalt shingles. Temperatures in Manassas during November and March regularly sit in the 40- to 55-degree range, which is comfortable for metal installation. Scheduling your project in the off-season is a smart way to save money without compromising quality.

Can a Roofer Do My Roof When It Is 45 Degrees Out?

Yes, a roofer can install a metal roof when it is 45 degrees outside. Metal panels are secured with screws or concealed clips and do not rely on temperature-sensitive adhesive. This makes metal one of the most flexible roofing materials for cooler-weather installation.

According to GAF, asphalt shingles need sustained temperatures above 40 degrees Fahrenheit for the sealant strips to activate and bond. Metal does not have this requirement. The only temperature concern with metal is that sealants and caulking used around flashings perform best above 40 degrees. Experienced contractors in Manassas and Northern Virginia adjust their approach for cooler conditions by using cold-weather-rated sealants and storing products in heated areas before application.

Is 1×4 or 2×4 Better for Metal Roofing?

1×4 battens are better for residential metal roofing installed over a solid deck or over existing shingles. 2×4 purlins are better for open-frame structures like pole barns and carports where there is no plywood or OSB deck underneath.

A 1×4 furring strip (actually 3/4 inch by 3-1/2 inches) creates the air gap needed for ventilation and provides a solid fastening surface for screws. For most homes in Manassas and Northern Virginia, 1×4 battens spaced 24 inches on center are the standard for standing seam and corrugated panel installations over existing decking.

A 2×4 purlin (actually 1-1/2 inches by 3-1/2 inches) spans wider gaps and provides more structural support. According to the NRCA, panel manufacturers specify maximum purlin spacing based on the panel profile and local wind and snow load requirements. Using the wrong size or spacing can void the warranty and compromise the roof’s wind resistance.

What Is the 25% Rule in Roofing?

The 25% rule in roofing means that if 25% or more of the roof covering is damaged or being removed, most building codes require a full replacement instead of a partial repair.

In Virginia, the Uniform Statewide Building Code follows similar guidelines based on the International Building Code. If more than 25% of the roof surface is affected, the entire roof must be brought up to current code standards, including updated requirements for underlayment, ventilation, and flashing.

This rule matters for cost planning after storm damage. If hail, wind, or a fallen tree damages more than a quarter of the metal panels, a full replacement is likely required. According to FEMA, storm damage accounts for about 33% of all residential roof replacements in the mid-Atlantic region. Roof repair covers damage below the 25% threshold, but once that line is crossed, a full replacement is the code-required path forward.

How to Tell If a Roofer Is Lying?

You can tell if a roofer is lying by watching for inflated roof measurements, verbal-only estimates, high-pressure sales tactics, no proof of license or insurance, and claims that the entire roof needs replacing when only a small section is damaged.

Inflated measurements. Get three estimates and compare the square counts. They should be within 1 to 2 squares of each other. A contractor who measures significantly higher than the others is either incompetent or inflating the job.

No written estimate. A legitimate contractor provides a detailed written estimate with squares, materials, labor, warranty, and scope of work. If they will not put it in writing, walk away.

Pressure to sign today. Reputable contractors give you time to compare and decide. “Sign now” tactics are a warning sign, especially from storm chasers who show up after severe weather.

No license or insurance. Virginia requires a valid license from the Department of Professional and Occupational Regulation (DPOR) and both liability insurance and workers’ compensation coverage. Ask for proof before any work begins.

According to the National Insurance Crime Bureau (NICB), roofing fraud spikes after major weather events. Homeowners in Northern Virginia should be especially cautious after storms. Avoiding common insurance claim mistakes protects homeowners from dishonest operators.

What Is Grace for Roofing?

Grace for roofing refers to Grace Ice and Water Shield, a self-adhering waterproof underlayment made by GCP Applied Technologies (now part of Saint-Gobain). It is a premium membrane installed beneath roofing materials in leak-prone areas like eaves, valleys, and around penetrations.

Grace Ice and Water Shield self-seals around nail and screw penetrations, creating a watertight barrier that standard felt or synthetic underlayment cannot match. In Northern Virginia, where ice dams can form during winter, ice and water shield along the eaves is critical for preventing water backup under the roofing material.

The Virginia Uniform Statewide Building Code requires ice barrier protection in areas with a history of ice damming. “Grace” has become a generic term in the industry, similar to how people say “Band-Aid” for any adhesive bandage. The importance of roof underlayment goes beyond basic products, and using a premium ice and water shield in high-risk areas adds a valuable layer of protection to any metal or shingle roof.

Metal Roofing Cost Breakdown by Type

Sources: RubyHome, Western States Metal Roofing, HomeGuide, Angi, NAHB, Metal Roofing Alliance

Frequently Asked Questions

How Much Does a Metal Roof Cost per Square in Manassas?

A metal roof costs roughly $700 to $1,600 per square (100 square feet) installed in Manassas and the greater Northern Virginia area, depending on the panel type and complexity. Corrugated steel falls on the lower end. Standing seam steel sits in the mid-range at about $1,000 to $1,600 per square. According to Western States Metal Roofing, standing seam steel runs $10 to $16 per square foot installed nationally. Labor rates in the D.C. metro area push costs toward the higher end of those ranges.

Is Metal Roofing Worth the Higher Upfront Cost?

Yes, metal roofing is worth the higher upfront cost for homeowners who plan to stay in the home for 15 years or more. Metal lasts 40 to 60 years compared to 20 to 30 for shingles, saves up to 40% on energy costs according to State Farm, and can earn insurance discounts of 5% to 35% according to the IBHS. Over time, these savings close the gap between the upfront cost of metal and the repeated replacement cost of shingles. Homeowners in Fairfax and Manassas see strong returns on this investment.

Can I Finance a Metal Roof in Northern Virginia?

Yes, you can finance a metal roof in Northern Virginia. Many roofing contractors offer financing with approved credit. Vertex Roofing offers 18 months of special financing with approved credit, making a premium metal roof accessible to homeowners who prefer to spread the cost over time. Financing options help homeowners get the roof they need now without waiting and risking further damage.

Does a Metal Roof Add Value to a Home in Manassas?

Yes, a metal roof adds value to a home in Manassas. According to Opendoor, a new roof adds $10,000 to $20,000 to a home’s resale value. Metal roofs are seen as a premium upgrade in the competitive Northern Virginia real estate market. Buyers appreciate the long lifespan, low maintenance, and modern appearance. A new roof versus a repair is often the deciding factor for buyers evaluating competing listings.

What Gauge of Metal Roofing Is Best for Northern Virginia?

24-gauge to 26-gauge steel is the best choice for residential metal roofing in Northern Virginia. 24-gauge is thicker, more rigid, and more resistant to hail dents and wind uplift. 26-gauge is lighter and slightly less expensive. According to the Metal Roofing Alliance, 24-gauge standing seam panels are the most popular choice among professional installers for residential projects nationwide. In the Manassas area, where storms can bring hail and high winds, 24-gauge is the recommended standard.

How Long Does It Take to Install a Metal Roof in Manassas?

It takes about 2 to 5 days to install a metal roof on a typical home in Manassas, depending on the panel type, roof complexity, and weather. Standing seam installations take longer than corrugated panels because of the precision required. According to the NRCA, most residential metal roof projects are completed within one week. Spring and summer thunderstorms in Northern Virginia can delay work, so experienced local crews plan around the weather forecast. Getting a clear timeline starts with preparing your home for roof installation.

Does Vertex Roofing Install Metal Roofs?

Yes, Vertex Roofing Contractors Inc. installs standing seam metal roofs for residential and commercial properties across Northern Virginia. The team serves homeowners within a 35-mile radius of Manassas, Virginia, and holds GAF Master Elite and CertainTeed ShingleMaster certifications, which provide the strongest manufacturer-backed warranties in the industry.

Final Thoughts

Metal roofing costs more upfront than asphalt shingles, but the total cost picture over 40 to 60 years tells a different story. When you factor in the longer lifespan, up to 40% energy savings, insurance discounts of 5% to 35%, and increased home value, metal is one of the smartest roofing investments a homeowner can make. The key is getting accurate measurements, choosing the right panel type and gauge, and hiring a contractor with specific metal roofing experience.

For homeowners in Manassas, Fairfax, Gainesville, and across Northern Virginia, Vertex Roofing Contractors Inc. is a GAF Master Elite Contractor and GAF President’s Club Award winner with over a decade of experience installing metal and shingle roofs throughout the region.

Call (703) 794-2121 today or request a free estimate to find out exactly what a metal roof will cost for your home.