To pick a roofing contractor, verify their license and insurance, check local references and online reviews, get at least three written itemized estimates, confirm they carry both a manufacturer material warranty and a workmanship warranty, and never sign anything under pressure. Choosing the wrong contractor is one of the most expensive mistakes a homeowner can make. According to the Better Business Bureau, roofing scams are the most frequently reported type of home improvement fraud in the United States. This guide covers every step of the hiring process, all the red flags to avoid, the questions you should ask before signing anything, and what to watch for when dealing with your insurance company.
How Can You Tell a Good Roofer?
You can tell a good roofer by five things: they are licensed and insured, they have a verifiable local address and history, they provide a written itemized estimate without being asked, they offer both a material warranty and a workmanship warranty, and they never pressure you to sign on the spot.
A good roofer walks the roof physically before writing a quote. According to RoofCrafters, any contractor who only uses satellite imagery or Google Earth to calculate materials is guessing, and guesswork leads to inaccurate quotes and surprise expenses. A reputable contractor will also inspect the attic before presenting an estimate to check for ventilation issues, hidden moisture, and signs of prior leaks that could affect the project scope.
Good roofers are also straightforward communicators. According to 2-10 Home Warranty, the right contractor will be patient, transparent, and happy to answer every question because they want to earn your trust. If a contractor gets evasive or dismissive when you ask about licensing, materials, or warranties, expect that same attitude once the job starts.
Look for manufacturer certifications as a shortcut to identifying quality contractors. GAF Master Elite, CertainTeed ShingleMaster, and Owens Corning Platinum Preferred are certifications that require contractors to meet installation standards, carry proper insurance, and maintain customer satisfaction records. According to Angi, most roofers prefer a specific shingle brand, and because of the volume they purchase, they can offer extended manufacturer warranties that lower-tier contractors cannot access. Vertex Roofing Contractors is a GAF Master Elite and CertainTeed ShingleMaster certified contractor, which means every installation in the Manassas, Virginia area meets the standards required to activate the strongest available manufacturer warranties.
What Questions Should I Ask a Potential Roofing Contractor?
The questions you should ask a potential roofing contractor fall into five categories: credentials, scope of work, materials, warranties, and payment terms. Here are the most important ones:
On credentials: Are you licensed to work in Virginia? Can you provide a certificate of insurance showing general liability and workers’ compensation? Do you have a physical business address in Northern Virginia? How long have you been in business?
On scope of work: Will you do a full tear-off or install over the existing roof? Who will be on site managing the crew daily? Will you pull the required building permits? How will you protect my driveway, landscaping, and gutters during the project? How do you handle unexpected deck damage if it is found after tear-off?
On materials: What specific shingle product and manufacturer will you use? What underlayment, ice and water shield, and flashing details are included? Will all flashings be replaced or will any be reused?
On warranties: What is the length and coverage of your workmanship warranty? Will you register the manufacturer warranty on my behalf? Can I verify the warranty registration directly with the manufacturer after the job?
On payment: What is your deposit requirement? What is the payment schedule? Do you provide financing options?
According to Quality Exteriors, professional contractors provide a clear itemized proposal covering materials, labor, start and finish dates, permit details, a cleanup plan, and payment terms. If any of these elements are missing from the written estimate, ask why. A vague estimate from a roofing contractor is one of the most reliable signs of a problem ahead. For homeowners in Manassas and across Northern Virginia, Vertex Roofing provides a free detailed roofing estimate that covers all of these elements in writing before any contract is signed.
What Are Red Flags When Hiring a Contractor?
Red flags when hiring a contractor are door-to-door solicitation after a storm, no verifiable physical address, refusal to provide proof of insurance or a license number, pressure to sign on the spot, a demand for large upfront payment, unusually low bids, vague estimates with no line-item breakdown, and offers to cover or waive your insurance deductible.
According to JDH Remodeling, roofing scams are the most frequently reported type of home improvement fraud in the United States according to the Better Business Bureau, and the majority involve transient contractors who follow storm events into affected neighborhoods. These contractors, called storm chasers, typically lack local accountability. Once the job is done and problems appear, they are long gone.
Unusually low bids are a specific red flag that catches many homeowners. According to RoofCrafters, some contractors intentionally offer a rock-bottom price to win the job and then inflate costs mid-project by claiming unexpected damage or additional scope. This bait-and-switch tactic leaves homeowners stuck with charges they never agreed to upfront. If a bid comes in significantly below the others, ask the contractor to explain exactly where the cost savings come from. If they cannot give a clear answer, walk away.
Refusing to provide a written contract is another absolute red flag. According to Bone Dry Roofing, any roofer who avoids putting the terms of the estimate in writing is hiding something. The written contract is your only legal protection if the work is incomplete, substandard, or different from what was discussed.
What Not to Tell Your Contractor?
What not to tell your contractor falls into a few key areas. Do not volunteer that you are in a rush or that you absolutely must have the job done by a specific date, because urgency works against you in negotiations. Do not tell a contractor they are the only one you are considering, as this eliminates your leverage to compare bids. Do not tell them the maximum amount you are willing to spend, because estimates tend to expand to fill the stated budget. And do not tell them you plan to handle the insurance claim process yourself without help, because a good contractor will navigate the adjuster process alongside you.
The bigger risk comes from what you tell your insurance adjuster, not just your contractor. According to InsuredAndMore, you should avoid any admissions of fault or liability when talking to an adjuster. Statements like “I knew the roof was getting old” or “we had a small leak last year but ignored it” can be used to shift blame and reduce the amount you are compensated. Describe the damage and the events as they happened, factually and without inserting personal opinions about cause or fault.
What Not to Say to a Roof Insurance Adjuster?
What not to say to a roof insurance adjuster is anything that implies prior knowledge of damage, deferred maintenance, or pre-existing conditions. Specifically, avoid saying that the roof was already old when the storm hit, that you noticed a problem before the storm and planned to fix it later, that you had previous leaks you did not repair, or that you are not sure the damage is storm-related.
Insurance companies use adjuster reports to determine whether damage was sudden and accidental, which is covered, or the result of neglect, which is not. According to 614 Exteriors, under actual cash value (ACV) policies, a roof already in poor condition before the storm may receive very little payout. Your best protection is to have a trusted local roofing contractor present during the adjuster’s inspection. According to Bill Ragan Roofing, the right roofing contractor becomes your greatest advocate with the insurance company, identifying line items the adjuster may have missed and ensuring the scope of work reflects the true cost of a proper repair or replacement.
Also never agree to let a contractor sign over your Assignment of Benefits (AOB) before any work begins. According to JDH Remodeling, AOB gives a contractor the authority to communicate directly with your insurance company on your behalf, and in some cases, contractors use this to inflate the scope of work without your knowledge. Stay in the process directly and keep your insurance company involved from start to finish.
What Is the Most Expensive Part of Replacing a Roof?
The most expensive part of replacing a roof is typically the roofing material itself, followed closely by labor. According to Cloud Roofing, asphalt shingles are the most affordable material option while high-end materials like slate, metal, and clay tile drive costs significantly higher. According to RoofingCalculator.com, labor typically accounts for 60 percent of the total cost of a roof replacement. On a $15,000 roof replacement, about $9,000 goes to labor.
Unexpected deck damage is the most common source of cost overruns. Once the old roof is torn off, the contractor can see the plywood or OSB deck for the first time. Rot, water damage, delamination, and soft spots require replacement before the new roof can go on. According to HomeGuide, roof decking replacement costs $2 to $5 per square foot for materials and labor, meaning a 2,000-square-foot roof with significant deck damage can add $4,000 to $10,000 to the original estimate. This is not a contractor adding hidden costs. It is a real condition that could not be seen until tear-off. Any reputable contractor will show you the damaged deck before proceeding and give you a written change order with the additional cost before any repair work begins.
Other significant cost factors are roof complexity (dormers, valleys, multiple pitches), the number of stories, the pitch of the roof, and whether any structural framing repairs are needed. A straightforward gable roof on a single-story home costs meaningfully less per square than a steep, complex hip roof on a two-story home with dormers.
Will Roofing Costs Go Down in 2026?
Roofing costs are unlikely to go down significantly in 2026. The U.S. roofing market was valued at approximately $29.65 billion in 2024 and is projected to continue growing at a compound annual growth rate of roughly 6.25 percent through 2033, according to Market Data Forecast. Rising material costs, labor shortages, and increasing extreme weather events that drive replacement demand all push prices upward rather than downward.
According to IBISWorld, the U.S. roofing contractors industry is projected to reach $76.4 billion in revenue by the end of 2025. The Bureau of Labor Statistics projects roofer employment to grow 6 percent from 2024 to 2034, faster than the national average for all occupations, which reflects ongoing demand rather than a cooling market. In the Manassas and Northern Virginia area, where storm activity has been consistent and housing stock is aging, demand for both roof repair and roof replacement remains strong through all seasons.
The best way to manage roofing costs in 2026 is to avoid emergency replacements by addressing problems early. Homeowners who schedule roof repairs promptly when issues arise avoid the much larger cost of structural damage from prolonged water intrusion. Water damage from a roof leak averages $4,300 per incident, and mold remediation from ongoing moisture problems can exceed $10,000, according to data compiled by 44 Roofing.
How Can You Tell a Good Roofer From a Bad One?
You can tell a good roofer from a bad one through five practical checks. First, verify their license number directly with Virginia’s Department of Professional and Occupational Regulation (DPOR) rather than simply taking their word for it. Second, request a certificate of insurance and call the insurance company to confirm the policy is active and covers general liability and workers’ compensation. Third, ask for three local references and actually call them. Fourth, check their BBB rating and read their Google and HomeAdvisor reviews, looking for patterns in complaints rather than isolated negative reviews. Fifth, compare their written estimate to other bids and look for unexplained gaps.
According to the National Insurance Crime Bureau (NICB), common tactics used by bad contractors include false promises, insisting on full payment upfront, exaggerating or fabricating damage, and performing inspections that are really just sales pitches. The NICB recommends that any homeowner with concerns about a roofing contractor report the company to the NICB tip line and their state’s contractor licensing board.
Around 15 percent of all home improvement scams reported to the Better Business Bureau since 2015 involved a roofing company, according to Eureka Contracting and Roofing. That percentage rises sharply after major storm events in affected regions. In Northern Virginia, where severe thunderstorms, hail, and occasional hurricane-force wind events are common, homeowners are particularly vulnerable to storm chaser activity every spring and summer.
How to Tell If a Roofer Is Lying?
To tell if a roofer is lying, watch for four specific behaviors: they claim damage exists that you have not been able to see yourself, they refuse to show you photographic proof of the damage they are describing, they insist the damage is worse than any other contractor has suggested without explanation, and they pressure you to file an insurance claim before you have had an independent inspection.
A legitimate roofer will put every damage claim in writing, provide photographs taken during the inspection, and never object to you getting a second opinion. According to Bill Ragan Roofing, a vague estimate with no scope of work and no line-item breakdown is one of the most reliable signs the contractor is hiding something, either in terms of the work they plan to do or the materials they plan to use.
If a contractor asks you to sign over your insurance check directly to them before the job is complete, that is not a normal request. Trustworthy contractors collect payment according to the schedule in the written contract, usually with a deposit, a progress payment, and a final balance due upon satisfactory completion. Any deviation from that structure deserves a direct question and a written explanation before you agree to it.
What Is the 80% Rule in Construction?
The 80% rule in construction is a homeowners insurance coverage requirement stating that a homeowner must carry insurance coverage equal to at least 80 percent of the home’s total replacement value in order for the insurer to pay out a full claim. If the home is under-insured, the insurer may only pay a proportional share of the claim, leaving the homeowner responsible for the uncovered balance.
According to InsuredAndMore, the 80% rule works like this: if your home would cost $300,000 to rebuild and you carry only $180,000 in dwelling coverage, which is 60 percent, your insurer could limit every payout to 60 percent of the cost of any covered loss, including a roof replacement. On a $20,000 roof replacement, that would mean a payout of only $12,000 instead of the full amount minus your deductible.
This rule matters in Northern Virginia because construction costs have risen sharply in recent years. A home insured to its replacement value five years ago may now be under-insured due to material and labor cost inflation. Homeowners who have not updated their dwelling coverage in several years should review their policy with their insurance agent before filing any roofing claim.
What Is the 25% Rule in Roofing?
The 25% rule in roofing is a building code regulation stating that if more than 25 percent of a total roof area or roof section is repaired, replaced, or recovered within any 12-month period, the entire roofing system must be brought into compliance with current building code. This rule affects both the scope of repair work allowed and the insurance implications of roofing claims.
According to 614 Exteriors, the 25% rule serves as the threshold for deciding when repairs become replacements. Once repairs cross that threshold within a 12-month window, most jurisdictions require the full system to meet modern standards. In Virginia, which follows the International Residential Code (IRC), this provision applies to residential roofing work and can turn what a homeowner hopes is a spot repair into a full code-compliant replacement. This is actually a benefit in most cases, because it means your insurance company may be obligated to pay for a full replacement rather than a partial patch.
If you have had multiple small repairs in the past year and now face new storm damage, check the cumulative total against the 25 percent threshold before accepting a repair-only scope of work from your insurer. A full roof replacement may be the correct outcome under code, and a certified contractor can document this for your adjuster.
What Are the Three Types of Roofing?
The three broad types of roofing are sloped roofing, low-slope roofing, and flat roofing. Each category encompasses multiple specific materials and systems.
Sloped roofing covers all roofs with a pitch of 3:12 or greater. The most common materials are asphalt shingles, metal panels, slate, clay tile, wood shakes, and copper. Sloped roofs shed water and snow through gravity and are used on the vast majority of residential homes in Northern Virginia. Vertex Roofing installs all major sloped residential roofing types across the Manassas and Northern Virginia area, including asphalt shingles and standing seam metal roofing.
Low-slope roofing covers pitches between 1/4:12 and 3:12. These roofs require waterproof membrane systems rather than standard shingles. Common materials include TPO, EPDM, PVC, modified bitumen, and torch-down systems. Many residential additions, garages, and commercial buildings in Northern Virginia use low-slope systems.
Flat roofing encompasses commercial and industrial structures with minimal or no pitch. These systems must handle standing water and rely entirely on membrane integrity and drainage design rather than gravity. Vertex Roofing installs and services commercial flat roof systems including TPO and EPDM across Northern Virginia businesses and commercial properties.
How Much Would Shingles on a 1,200 Sq Ft Roof Cost?
Shingles on a 1,200 square foot roof would cost roughly $5,400 to $11,400 for a complete installation depending on the shingle grade, roof complexity, and labor in your area. A 1,200 square foot home footprint typically corresponds to about 13 to 15 roofing squares when the pitch factor is added. At $4.50 to $7.50 per square foot for installed asphalt shingles, per RoofingCalculator.com, the total falls in that range for a standard-pitch roof.
Premium architectural shingles from GAF or CertainTeed run $4.39 to $5.95 per square foot installed. Standard three-tab shingles cost less but have a shorter lifespan and are less wind-resistant, making them a poor value for Northern Virginia’s weather conditions. Standing seam metal roofing on a 1,200 square foot home would cost $18 to $24.50 per square foot installed, a significantly higher upfront investment that pays back through 40 to 70 years of service and significantly lower maintenance.
Keep in mind that the cost does not stay fixed once the work begins. Deck repair, additional flashing, ventilation upgrades, and permit fees all add to the final number. Any estimate that does not include a line for potential deck repair, or that says flat-out there will be no deck issues before the tear-off happens, is not giving you a complete picture. The only way to know the full cost is for a contractor to perform a thorough inspection and price all foreseeable scenarios in writing before work begins.
What Is the Most Common Contractor Mistake?
The most common contractor mistake in roofing is high-nailing, meaning driving nails above the designated nailing zone on each shingle. High-nailing leaves the shingle attached only to a single layer of fiberglass mat rather than the double-layer reinforced zone, which dramatically reduces wind resistance. According to InterNACHI’s roof inspection training series, high-nailing is extremely common and constitutes improper installation in every case, regardless of how often it is seen in the field.
Other frequent contractor mistakes include skipping or improperly installing step flashing at wall junctions, re-using old flashing around chimneys and vents rather than installing new metal, failing to install adequate ice and water shield at the eaves, and not sealing pipe boots properly. According to JDH Remodeling, storm chasers cut corners most often on drip edge installation, eave ice and water shield, valley detailing, and step flashing at every wall junction. These are all areas homeowners cannot see from the ground, which is exactly why they are targeted by careless contractors.
Improper installation voids manufacturer warranties and can result in denied insurance claims after storm damage. Homeowners who suspect their roof was poorly installed should schedule a professional inspection before a claim is needed. The Vertex Roofing team provides thorough inspections and can document installation quality for both homeowners and insurance adjusters.
What Are the 5 C’s of a Contract?
The 5 C’s of a contract are Competent parties, Consideration, Consent, Capacity, and Clarity. In the context of a roofing contract, these translate into practical protections every homeowner should verify before signing.
Competent parties means the contractor must be a licensed business entity in Virginia with verifiable credentials. A person operating without a license cannot enforce a contract and leaves you with no recourse.
Consideration means both sides exchange something of value, your payment for their labor and materials. The scope of work, materials specified, and price must all be clearly stated so the exchange is unambiguous.
Consent means both parties enter the agreement freely, without pressure, deception, or misrepresentation. Any contract signed under a high-pressure sales tactic or based on fabricated damage claims is legally vulnerable from the start.
Capacity means both parties are legally able to enter the contract. For a roofing contractor, this means being properly licensed and insured in Virginia. For the homeowner, it means understanding what you are signing.
Clarity is the most practical element. According to Bill Ragan Roofing, every roofing estimate should have a scope of work broken down by line items that show exactly what will be done, from the number of layers being torn off to how and where materials will be installed to the cleanup after completion. Any contract that says only “roof replacement” with a price is not a contract that protects you.
Good Roofer vs. Bad Roofer: What to Look For
| Category | Good Roofer | Bad Roofer |
|---|---|---|
| Licensing and insurance | Provides certificate of insurance and license number immediately upon request | Hesitates, makes excuses, or cannot provide documentation |
| Estimate format | Written, itemized line-by-line breakdown of all materials, labor, permits, and cleanup | Verbal quote or single-line “roof replacement” with a price only |
| Sales approach | Patient, gives time to review, welcomes second opinions | Pressures signing on the spot, limited-time offers, urgency tactics |
| Warranty coverage | Provides both manufacturer material warranty and written workmanship warranty of 10+ years | Offers vague or no warranty; workmanship coverage under 2 years |
| Local presence | Verifiable physical address, local reviews across multiple platforms, years in community | P.O. box or out-of-state contact only, no local reviews, arrived after a storm |
| Payment terms | Reasonable deposit (10–20%), structured progress payments, balance due at completion | Demands 50% or more upfront, requests cash payment |
| Insurance claim handling | Advocates for the homeowner, documents damage thoroughly, works within legal claim process | Offers to waive deductible, requests AOB before work starts, inflates scope for insurer |
| Manufacturer certification | GAF Master Elite, CertainTeed ShingleMaster, or equivalent certified installer | No manufacturer affiliation, no access to enhanced warranties |
Sources: Better Business Bureau contractor fraud data, National Insurance Crime Bureau roofing fraud guide, Bill Ragan Roofing estimate red flags guide, RoofCrafters contractor selection guide, JDH Remodeling storm chaser red flags, Angi contractor hiring tips, 2-10 Home Warranty roofer selection guide.
Frequently Asked Questions About Picking a Roofing Contractor in Northern Virginia
How Can You Tell a Good Roofer in the Manassas, Virginia Area?
You can tell a good roofer in the Manassas, Virginia area by verifying their Virginia contractor’s license with DPOR, confirming active general liability and workers’ compensation insurance, checking their Google and BBB reviews for patterns of satisfied customers, and confirming they have a verifiable physical address in Northern Virginia or Prince William County. Local contractors have community accountability that out-of-state storm chasers do not. Around 15 percent of all home improvement scams reported to the BBB since 2015 involved a roofing company, and the large majority of those complaints target homeowners who hired a contractor without verifying their local credentials first.
Is $30,000 Too Much for a Roof in Northern Virginia?
Whether $30,000 is too much for a roof in Northern Virginia depends on the roof size, complexity, and materials. For a standard single-story home with a simple gable roof and mid-grade architectural shingles, $30,000 is toward the high end and getting three quotes is strongly recommended. For a larger two-story home with a complex hip roof, dormers, steep pitch, needed deck repairs, and premium or metal roofing, $30,000 can be a fully justified and competitive number. Premium architectural shingles run $4.39 to $5.95 per square foot installed nationally, and standing seam metal roofing reaches $18 to $24.50 per square foot. Labor accounts for approximately 60 percent of the total cost according to RoofingCalculator.com. Always get at least three written itemized estimates from licensed, insured contractors before making a decision.
What Time of Year Is the Cheapest to Replace a Roof in Northern Virginia?
The cheapest time of year to replace a roof in Northern Virginia is late winter, specifically January through February, when roofing demand is at its lowest and contractors are most willing to offer competitive pricing to fill their schedules. According to Bill Ragan Roofing, winter is the slowest season in the roofing industry and prices become more competitive during these months. Fall is the busiest and most expensive time because homeowners rush to complete work before cold weather, which increases both material and labor demand. If your roof is not in immediate distress, scheduling a replacement in January or February and booking Vertex Roofing’s spring slot can deliver the best combination of pricing and installation conditions.
What Color Roof Increases Home Value in Northern Virginia?
Neutral colors such as charcoal gray, slate gray, and weathered wood brown increase home value most reliably in Northern Virginia because they complement the widest range of exterior siding colors common in the region’s architectural styles. According to Remodeling Magazine’s Cost vs. Value data, homeowners recoup an average of 61.2 percent of metal roof installation costs in added home value, and similar positive returns apply to quality asphalt shingle replacements in appealing neutral tones. GAF and CertainTeed, the two brands Vertex Roofing installs across Fairfax, Woodbridge, and Manassas, both offer extensive color palettes specifically developed for East Coast residential architecture.
What Happens If I Hire an Unlicensed Roofer in Virginia?
If you hire an unlicensed roofer in Virginia, you take on all the legal and financial risk yourself. If a worker is injured on your property and the contractor has no workers’ compensation insurance, you can be personally liable for medical bills and legal costs. If the work is defective or incomplete, you have no recourse through Virginia’s contractor licensing system because the contractor is not in it. You cannot file a complaint with DPOR, and unlicensed contractors often have no bonding, meaning there is no financial guarantee backing their work. According to Kline Home Exteriors, if an uninsured contractor gets hurt on your property, you could be held liable even if you did not know they lacked coverage. Always ask for the Virginia contractor’s license number before any work begins and verify it directly with DPOR.
Can a Roofer Do My Roof When It’s 45 Degrees Out in Northern Virginia?
Yes, a roofer can do your roof when it is 45 degrees out, but there are important conditions. Metal roofing is not temperature-sensitive and can be installed in cold weather without special precautions beyond sealant handling. Asphalt shingles require more care below 50°F because the self-sealing adhesive strip on each shingle activates through heat and sunlight, and shingles installed in cold weather may not seal for weeks or months, leaving them vulnerable to wind uplift in the meantime. According to Fine Homebuilding, shingles installed in fall or winter on north-facing slopes may accumulate debris under unsealed tabs and sometimes fail to seal completely even after warm weather arrives. A reputable contractor working in cold weather will store shingles in a heated space before installation and may hand-seal the adhesive strips to compensate for the lack of solar activation.
How Do I Verify That My Warranty Was Registered After Roof Installation?
To verify that your warranty was registered after roof installation, call the shingle manufacturer directly with your home address and the installation date. According to JDH Remodeling, every major manufacturer, including GAF, CertainTeed, and Owens Corning, maintains a database of registered warranties and can confirm whether your address is in the system. If it is not, contact your contractor immediately and request proof of registration. Unregistered warranties are worthless. Vertex Roofing registers every GAF and CertainTeed warranty on behalf of the homeowner as a standard part of every job, and homeowners can verify their registration with the manufacturer at any time after the work is complete.
Final Thoughts
Picking a roofing contractor comes down to one simple standard: do not let urgency, a low price, or a smooth sales pitch override the basic verification steps. Check the license, confirm the insurance, read the reviews, get the estimate in writing, and take the time to compare. The roofing industry has more than its share of bad actors, and according to the BBB, roofing fraud accounts for a larger share of home improvement scams than any other trade. But the honest contractors, the ones who are licensed, certified, locally rooted, and willing to put everything in writing, are also out there and not hard to find when you know what to look for.
Vertex Roofing Contractors has served Northern Virginia for over 20 years as a GAF Master Elite and CertainTeed ShingleMaster certified roofing contractor based in Manassas, Virginia. Every estimate is written, itemized, and presented without pressure. Every job comes with manufacturer-registered warranty coverage and a workmanship guarantee. Homeowners from Fairfax to Woodbridge to Gainesville trust the Vertex Roofing Contractors team for the same reason: good service, better price, and a roof you can count on. Call (703) 794-2121 or schedule your free estimate online today.
